Rudder Design
We wanted to make our balloon payload steerable. this was going to be achieved with a rudder, and here are some details on how we were going to achieve it.
Toggle header
Welcome to the internet home of Andrew Wilkie
Hardware
This is where most of the hardware information hides. Including what hardware used and how it was being used.
Circuit Design
Building a circuit take quite a bit of time and effort. A schematic has to be constructed – which is a diagram showing the links between all of the electronics. A prototype should be built and tested, the schematic refined and then finally the PCB …
Project Stages
Stages There are 3 stages to our project: Design and Creation Launch Results Creation (July-September) The creation stage consists of the team designing and building each of their parts of the project, as well as collaboration and integration to complete the weather balloon. Each team member …
Introduction to G(A)SP
Welcome to the G(A)SP project. G(A)SP stands for Gungahlin (Almost) Space Project, and it is being designed a run by Gungahlin College students. Find out more about what the project actually is and what we plan to do.